VN460SP-E [STMicroelectronics]

VN460SP-E Overview

The package is in the form of a Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.The lighting driver is mounted in the Surface Mount position.Relay, Solenoid Driver is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It is part of the VN460 family of LED drivers.It contains 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.This results in the maximum output current dropping to 25A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 20mOhm resistance are used.This case results in a 25A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 36V.There is a maximum input voltage of 36V volts.The input voltage minimum is 5.5V volts.There is a maximum current requirement of 15?A for its operation.

VN460SP-E Features

Resistance of 20mOhm

VN460SP-E Applications

There are a lot of STMicroelectronics
VN460SP-E Power Switches ICs applications.

• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD