VN540-12-E [STMicroelectronics]

VN540-12-E Overview

It is packaged in the form of a Tube.It is included with the Pentawatt-5 (Straight Leads, Staggered Depth) package as well.A Through Hole mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -25°C~85°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.There are Status Flag features available on the LED driving board.As you can see, it comes from the VN540 family.A total of 5 terminations can be found in it.During operation, the 5 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 4A.It is possible to obtain high efficiency with a supply voltage of 24V.Through Hole is mounted in the way of this LED driving board.In this case, there is 50mOhm resistance in the LED driving board.It is included in the VIPower? series.This results in a 2.8A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).This system has a maximum current requirement of 1mA.

VN540-12-E Features

Supplied from 24V
Resistance of 50mOhm

VN540-12-E Applications

There are a lot of STMicroelectronics
VN540-12-E Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD