VND830E-E [STMicroelectronics]

VND830E-E Overview

As you can see, it's packaged in the way of a Tube.This file is included in package 16-SOIC (0.295, 7.50mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Auto Restart.I believe it belongs to the VND830 family.As a result, there are 16 terminations.In order to operate, 16 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 9.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 16 pins.It has 65mOhm resistance.These electrical components are part of the VIPower? series.When this is the case, the output current is set to 9A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Optimal efficiency requires a voltage of 36V.The maximum input voltage is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.A maximum current requirement of 12?A is required for its operation.

VND830E-E Features

Supplied from 13V
Resistance of 65mOhm

VND830E-E Applications

There are a lot of STMicroelectronics
VND830E-E Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards