VNQ600-E [STMicroelectronics]

VNQ600-E Overview

It is packaged in the form of a Tube.It is included with the 28-SOIC (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the VNQ600 family.During operation, the 28 pins are used.To comply with the operation criteria, the maximum output current is reduced to 15A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 35mOhm resistance in the LED driving board.This results in a 25A output current.For maximum efficiency, the supply voltage should be set to 36V.The maximum input voltage of the LED driver is 36V volts.There is a minimum input voltage of 5.5V volts for this LED driver.This system has a maximum current requirement of 6mA.

VNQ600-E Features

Resistance of 35mOhm

VNQ600-E Applications

There are a lot of STMicroelectronics
VNQ600-E Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD