EEPROM

Configuration one-time programmable (OTP) read-only memory designed to store configuration bitstreams for Spartan-II/Spartan-IIE FPGA devices.

The XC1700 family of configuration PROMs provides an easy-to-use, cost-effective method for storing large Xilinx FPGA configuration bitstreams.

The XC1700 family of configuration PROMs provides an easy-to-use, cost-effective method for storing large Xilinx FPGA configuration bitstreams.

The X4323, X4325 combines four popular functions, Power-on Reset Control, Watchdog Timer, Supply Voltage Supervision, and Serial EEPROM Memory in one package.

The X28HC64 is an 8k x 8 EEPROM, fabricated with Intersil’s proprietary, high performance, floating gate CMOS technology.

The X28C512, X28C513 are 64K x 8 EEPROM, fabricated with Intersil’s proprietary, high performance, floating gate CMOS technology. Like all Intersil programmable nonvolatile memories, the X28C512, X28C513 are 5V only devices.

S34MS01G2, S34MS02G2, S34MS04G2 are 1 Gbit/2 Gbit/4 Gbit SLC NAND Flash for Embedded.

64-Kbit 1.65V minimum non-volatile fast write serial EEPROM with I2C bus interface.

1024 · 8-bit CMOS EEPROM with I2C-bus interface

4096-bit CMOS non-volatile electrically erasable memory with 2-wire bus interface.

1 Mbit serial SPI bus EEPROM with high speed clock

16 Kbit and 8 Kbit serial SPI bus EEPROM with high speed clock

16Kbit and 8Kbit Serial SPI Bus EEPROM with high speed clock.

16 Kbit and 8 Kbit serial SPI bus EEPROM with high speed clock

16 Kbit and 8 Kbit serial SPI bus EEPROM with high speed clock

16 Kbit and 8 Kbit serial SPI bus EEPROM with high speed clock

4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

The M93C46, M93C56, M93C66, M93C76, and M93C86 are electrically erasable programmable memory (EEPROM) devices accessed through the MICROWIRE bus protocol.

MICROWIRE serial access EEPROM devices with 1 Kbit to 16 Kbit memory capacity.

MICROWIRE® serial access EEPROM with 1 Kbit to 16 Kbit memory capacity, available in 8-bit or 16-bit wide organization.

MICROWIRE® serial access EEPROM with 1 Kbit to 16 Kbit memory sizes, available in 8-bit or 16-bit wide organization.

Electrically erasable programmable memory (EEPROM) devices accessed via MICROWIRE bus protocol.

64 Kbit serial I²C bus EEPROM with hardware write control on top quarter of memory

64 Kbit serial I²C bus EEPROM with hardware write control on top quarter of memory

2 Kbit Serial I²C Bus EEPROM for DIMM Serial Presence Detect

1-Mbit serial I²C bus EEPROM

The M24C32 is a 32-Kbit I2C-compatible EEPROM organized as 4 K × 8 bits.

4-Kbit I2C-compatible EEPROM

1-Kbit and 2-Kbit serial I²C bus EEPROMs

512 Kbit and 256 Kbit serial I²C bus EEPROM with three Chip Enable lines

512 Kbit and 256 Kbit serial I²C bus EEPROM with three Chip Enable lines

512 Kbit and 256 Kbit serial I²C bus EEPROM with three Chip Enable lines

EEPROM ROHS

EEPROM ROHS

The dual port EEPROM series consists of two independent banks, and each bank can be controlled separately using dedicated control pins. This product uses a 2-wire serial interface, and is the optimal device for realizing substantial reductions in system cost and mounting area, as well as low power consumption.

The LE24CB642 is a 2-wire serial interface EEPROM with 64k bits capacity, compatible with I2C memory protocol.

Two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM) with high speed and high reliability through CMOS EEPROM technology.

A 512k-bit two-wire serial interface EEPROM with high speed and reliability, compatible with I2C protocol.

The LE2432RDXA is a two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM).

The LE2416RLBXA is a 2-wire serial interface EEPROM with high speed and high reliability, using high performance CMOS EEPROM technology.

The LE2416RDXA is two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). This device realizes high speed and a high level reliability by high performance CMOS EEPROM technology.

The LE2416DXA is two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). This device realizes high speed and a high level reliability by high performance CMOS EEPROM technology.

2K-bit/4K-bit serial electrically erasable PROM (EEPROM) with Microwire interface.

Serial Flash Memory with Octal I/O and xSPI interface, supporting up to 200MHz at 1.8V and 133MHz at 3.0V, with on-chip ECC.

ISSI’s Octal Memory is a portfolio of high-speed, low pin count memory products that utilize the JEDEC xSPI interface.

896bit 1-Wire WLP-4(0.9x0.9) EEPROM ROHS

1Kb I2C/SMBus EEPROM with SHA-1 Engine

4Kb 1-Wire EEPROM with unique 64-bit registration number and user-programmable memory.

1Kb Protected 1-Wire EEPROM with SHA-1 Engine

The DS2431 is a 1024-bit, 1-Wire EEPROM chip organized as four memory pages of 256 bits each.