Interface Modules

The FT121 G-Sensor shield is designed to connect directly to an Arduino Pro development board. The shield allows the micro-controller on the Arduino Pro to access the FT121 USB device controller.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

V2DIP2-64 module is designed to allow rapid development of designs using the VNC2-64Q IC. The V2DIP2-64 is supplied as a PCB designed to fit into a 60 pin 0.8” wide, 0.1” pitch DIP socket.

The USB-RS485-PCB is a USB to RS485 level serial UART converter PCB incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The PCB provides a fast, simple way to connect devices with a RS485 interface to USB.

The USB-COM232-PLUS4 provides a simple method of adapting four legacy RS232 serial devices to a modern USB port using the industry standard FTDI FT4232H USB2.0 Hi-Speed serial bridge chip.

The UMFT602A/X is an evaluation/development module with either HSMC or FMC (LPC) connectors for interfacing FTDI's FT602 32bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC with external hardware.

The UMFT602A/X is an evaluation/development module with either HSMC or FMC connectors for interfacing FTDI's FT602 32-bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC.

Evaluation module for bridging FIFO bus to USB 3.0 host using FTDI's FT60x IC, with FMC or HSMC connectors.

The UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI’s FT60x USB 3.0 Superspeed IC with external hardware. It allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x.

The UMFT4222EV is a development module which uses FTDI's FT4222H, a Hi-Speed USB2.0 to QuadSPI/I2C Bridge in compact 32-pin QFN package.

UMFT201XA is a USB to I2C DIP module with a 0.3” row pitch. It is a development module for FTDI’s FT201XQ, one of the devices from FTDI’s range of USB interface bridging integrated circuit devices.

FT121 is a USB generic interface controller with integrated SPI slave interface and advanced features for USB connectivity.

UM232H-B is a multiple-interface Hi-Speed USB to UART, 245 FIFO, FT1248, I2C, SPI and GPIO break-out module.

The TTL-232R-PCB is a USB to TTL serial UART converter PCB incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The PCB provides a fast, simple way to connect devices with a TTL level serial interface to USB.