Embedded Solutions

High-Performance, General Purpose and USB 32-bit Flash Microcontrollers

The MRF24WG0MA/MB is a low-power, 2.4 GHz IEEE 802.11b/g-compliant surface mount module with integrated RF components, MAC, baseband, and hardware security.

PIC32MX1XX/2XX 28/36/44-PIN 32-bit Microcontrollers (up to 256 KB Flash and 64 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

SPI-controlled monochrome OLED display for embedded applications.

The PmodRTCC is a real-time clock/calendar powered by the Microchip MCP79410.

PmodRF2 interface board for Microchip MRF24J40 IEEE 802.15.4 2.4GHz RF transceiver, adding RF communication to Digilent systems.

The PmodWiFi is an interface board for the Microchip® MRF24WB0MA Wi-Fi™ radio transceiver module. The PmodWiFi can add Wi-Fi communication to any Digilent system board.

The Cerebot 32MX7 board is a useful tool for embedded control and network communications projects for both students and hobbyists.

High-Performance, General Purpose and USB 32-bit Flash Microcontrollers

Evaluation board for prototyping and evaluating TC64X/TC64XB brushless DC fan controllers.

The SY87701L is a complete Clock Recovery and Data Retiming integrated circuit for data rates from 32Mbps up to 1.25Gbps NRZ.

Actel is discontinuing older Silicon Sculptor programming modules and replacing them with newer versions to improve programming yield for specific FPGA devices.

Silicon Sculptor 4 is an FPGA programming tool equipped to deliver high data throughput and promote ease of use.

The RN-4870-SNSR is a development board based on the ultra-compact Bluetooth 4.2 Low Energy RN4870 module.

The PDS-104GO is an outdoor PoE switch that enables the connection of four powered devices to a network such as an outdoor WLAN, outdoor IP camera, or outdoor P2P radio.

The PD70101 and PD70201 devices are integrated Powered Device (PD) interface and PWM controllers for a DC-DC converter used in IEEE802.3af and IEEE802.3at applications.

Microsemi's PD70100EVB15B Evaluation Board provides designers with the needed environment to evaluate the performance and implementation of PD applications based on PD70100 PDchip.

Compact, 8-channel, 20W LED Driver Board with I2C Interface

Compact, 8-channel, 20W LED Driver Board with I2C Interface

Compact, 8-channel, 20W LED Driver Board with I2C Interface

Compact, 6-channel LED Driver Board with I2C Interface

Compact, 6-channel LED Driver Board with I2C Interface for medium-sized LCD panels.

SPPS is a solution provided by Microsemi for secure programming of SmartFusion2/IGLOO2 devices in untrusted environments.

Microsemi Secure Production Programming Solution (SPPS) for SmartFusion2/IGLOO2 devices.

The MCP42XX PICtail Plus Daughter Board is a development tool for interfacing with MCP42XX digital potentiometers via the PICtail Plus interface.

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers

MCP1630 Low-Cost Li-Ion Battery Charger Reference Design

The MCP1630 NiMH Battery Charger Demo Board is a high-performance, high-frequency switching battery charger that uses the MCP1630 and a microcontroller to charge NiMH batteries.

MCP1252 Charge Pump Backlight LED Demo Board is a development board for evaluating the MCP1252 charge pump IC in LED backlight applications.

The KSZ9031RNX is a completely integrated triple-speed (10BASE-T/100BASE-TX/1000BASE-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.

The KSZ9021GN is a completely integrated triple speed (10Base-T/100Base-TX/1000Base-T) Ethernet Physical Layer Transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.

The KSZ8842-PMQL/PMBL is a 2-port Ethernet switch with a PCI interface, designed for Fast Ethernet applications.

The CENTAUR KS8695PX, Multi-Port PCI Gateway Solution, delivers a new level of networking integration, performance, and overall BOM cost savings, enabling original equipment manufacturers (OEMs) to provide customers feature-rich, low-cost solutions for the residential gateway and small office environment.

The KSZ8051MLL is a single-supply 10Base-T/100Base-TX Ethernet physical layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.

The KSZ8041NL is a single supply 10BASE-T/100BASE-TX physical layer transceiver, which provides MII/RMII interfaces to transmit and receive data. The KSZ8041RNL is an enhanced Reduced Media Independent Interface (RMII) version of the KSZ8041NL that does not require a 50-MHz system clock.

The KSZ8051/8031/8021 series is a low-power, small package 10/100 Physical (PHY) Layer Transceiver that provides the MII interface or the RMII interface to transmit and receive data over standard CAT-5 unshielded twisted pair (UTP) cable or fiber.

KS8993 3-Port 10/100 Integrated Switch with PHY and Frame Buffer

Two-Port Ethernet Switch with Non-PCI Interface

3.3V Single Power Supply 10/100 Base-TX/FX MII Physical Layer Transceiver with 2.5V core, supporting MII and RMII interfaces.

The CENTAUR KS8695PX, Multi-Port PCI Gateway Solution, delivers a new level of networking integration, performance, and overall BOM cost savings, enabling original equipment manufacturers (OEMs) to provide customers with feature-rich, low-cost solutions for the residential gateway and small office environment.

The CENTAUR KS8695P, Multi-Port PCI Gateway Solution, delivers a new level of networking integration, performance, and overall BOM cost savings.

The KSZ8001 is a 10BASE-T/100BASE-TX/100BASE-FX Physical Layer Transceiver, operating the core at 1.8 volts to meet low voltage and low power requirements. The solution provides MII/RMII/SMII interfaces to transmit and receive data.

Universal input, single high brightness LED driver demoboard using HV9931 IC.

The HV9931 LED driver is primarily targeted at low to medium power LED lighting applications where galvanic isolation of the LED string is not an essential requirement. The driver provides near unity power factor and constant current regulation using a two stage topology driven by a single MOSFET and control IC.

16-Channel, 3-Level HV ultrasound transmitter with built-in digital beamformer.

The Supertex HV2731 is a 220V, 16-channel, high voltage, analog switch integrated circuit (IC) with output bleed resistors.

16-channel low harmonic distortion high-voltage analog switch ICs designed for applications requiring high-voltage switching controlled by low-voltage control signals.

The HV2601/HV2701 devices are low-charge injection, 16-channel, high-voltage analog switch integrated circuits (ICs).

The HV238 is a 220V, 16-channel, high-voltage analog switch integrated circuit (IC) with output bleed resistors.