Development Tools

The TFA9894 is a high efficiency 10 V boosted class-D audio amplifier with a sophisticated SpeakerBoost and Protection algorithm. It can deliver up to 5.6 W (AVG) output power into an 8 Ω speaker and up to 6.2 W (AVG) output power into 4 Ω speaker, at a battery supply voltage of 4.0 V.

NXP GreenChip low power SMSP controller TEA172x Ultra-low standby, cost-effective power supplies up to 11 W

The TDF8541 is one of a new generation of complementary quad Bridge-Tied Load (BTL) audio power amplifiers intended for automotive applications.

The MPC5646C is a new family of next generation microcontrollers built on the Power Architecture embedded category.

The MC33696 is a highly integrated transceiver designed for low-voltage applications. It includes a programmable PLL for multi-channel applications, an RSSI circuit, a strobe oscillator that periodically wakes up the receiver while a data manager checks the content of incoming messages.

The MC13852 is a cost-effective high gain LNA with low noise figure, designed for applications from 400 to 1000 MHz.

The MC13852 is a cost-effective high gain LNA with low noise figure, designed for applications from 400 to 1000 MHz.

The MC13851 is a cost-effective, high IP3 LNA with low noise figure. This is the smaller leadless package version of the MC13821 device.

The MC13851 is a cost-effective, high IP3 LNA with low noise figure. This is the smaller leadless package version of the MC13821 device.

The MC13851 is a cost-effective, high IP3 LNA with low noise figure, available in a small leadless package.

The MC13851 is a cost-effective, high IP3 LNA with low noise figure. It includes an integrated bypass switch to preserve high input intercept performance in variable signal strength environments and boosts dynamic range.

M68ICS08RK In-Circuit Simulator

M68ICS08MR In-Circuit Simulator for M68 series microcontrollers.

M68ICS08KX In-circuit Simulator Board

M68ICS08JLJK In-Circuit Simulator for M68HC08 family microcontrollers

M68ICS08JB In-Circuit Simulator

M68ICS08AB In-Circuit Simulator for M68HC08 family microcontrollers.

M68ICS05P is an in-circuit simulator for the HC705P microcontroller, providing hardware and software for development and debugging.

M68ICS05KJ in-circuit simulator for HC705KJ/J1A microcontroller development and debugging.

M68ICS05C is an in-circuit simulator for the HC705C microcontroller, providing hardware and software for development and debugging.

M68ICS05B HC705B In-Circuit Simulator

Freescale Semiconductor is a world leader in 8-bit microcontroller (MCU) technology, offering a large portfolio of compact, cost-effective solutions with analog, memory, and communications options.

Freescale's Sensor Toolbox is a collection of evaluation boards and software that supports Xtrinsic sensing solutions, enabling detection of motion, touch, and pressure.

NXP Sensor Toolbox is a complete system for product development with NXP sensors, encompassing a wide spectrum of sensor boards and software tools for various compatible Kinetis microcontrollers.

NXP Sensor Toolbox is a complete system for product development with NXP sensors, encompassing a wide spectrum of sensor boards and software tools for various compatible Kinetis® microcontrollers.

The MPXxx6115A series sensor integrates on-chip, bipolar op amp circuitry and thin film resistor networks to provide a high output signal and temperature compensation.

The MPR121 is the second generation sensor controller following the initial release of the MPR03x series of devices. The MPR121 features an increased internal intelligence plus Freescale’s second generation capacitance detection engine.

The MPR03X is an Inter-Integrated Circuit Communication (I2C) driven Capacitive Touch Sensor Controller, optimized to manage two electrodes with interrupt functionality, or three electrodes with the interrupt disabled.

The MPL115A2 is an absolute pressure sensor with a digital I²C output targeting low cost applications. It employs a MEMS pressure sensor with a conditioning IC to provide accurate pressure measurements from 50 to 115 kPa.

The MPL115A1 is an absolute pressure sensor with a digital SPI output targeting low cost applications. It features a miniature LGA package, low current consumption, and a wide operating temperature range.

The KITMPL115A1EVB is a pressure development board designed for use with Freescale's MPL115A pressure sensor, enabling evaluation and development through the Sensor Toolbox software platform.

The MMA955xL device an intelligent sensor, incorporating dedicated accelerometer MEMS transducers, signal conditioning, data conversion, and a 32-bit programmable microcontroller. This unique blend transforms Freescale’s MMA955xL into an intelligent, high-precision, motion-sensing platform able to manage multiple sensor inputs.

The MMA955xL device is an intelligent sensor, incorporating dedicated accelerometer MEMS transducers, signal conditioning, data conversion, and a 32-bit programmable microcontroller.

The MMA7660FC is a ±1.5 g 3-Axis Accelerometer with Digital Output (I2C). It is a very low power, low profile capacitive MEMS sensor featuring a low pass filter, compensation for 0g offset and gain errors, and conversion to 6-bit digital values at a user configurable samples per second.

The 34712 is a highly integrated, space-efficient, low cost, single synchronous buck-switching regulator with integrated N-channel power MOSFETs.

Freescale’s MPXY8300 tire pressure monitoring system (TPMS) chipset is designed to enable a timely warning to the driver in the case of under-inflated or over-inflated tires on cars, trucks or buses—even while in motion.

FSL-ZB-SNF is a Zigbee Protocol Analyzer hardware device.

FSICE EMULATOR KIT FOR 9

FSICE emulator kit for 9

FSICE EMULATOR KIT FOR 9

FSICE emulator kit for 9, part of DAOO1340 product line.

FSICE EMUL FOR 908ASAZ

Quick start guide for setting up the Freescale In-Circuit Emulator Base (FSICEBASE) for HC(S)08 microcontrollers.

The Kinetis MKW01Z128 wireless MCU is a highly integrated RF transceiver that operates over a wide frequency range including 315 MHz, 433 MHz, 470 MHz, 868 MHz, 915 MHz, 928 MHz, and 955 MHz in the license-free Industrial, Scientific and Medical (ISM) frequency bands.

FRDM-33879A-EVB Evaluation Board featuring the MC33879A Configurable Octal Serial Switch with Open Load Detect IC.

The MC13192 is a short range, low power, 2.4 GHz Industrial, Scientific, and Medical (ISM) band transceiver.

Power Management IC Development Tools WCT-15WAUTO13

Interface Development Tools TJA1465A-EVB

Power Management IC Development Tools TEA2208DB1576

Development Boards & Kits - Other Processors BGA receiver/adapter, 416 PIN, 1.0 MM, BGA BASE