Power

UCC3958 is a monolithic BCMOS lithium-ion battery protection circuit that is designed to enhance the useful operating life of one cell rechargeable battery packs.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch.

Two-cell Lithium-Ion/Polymer battery protector with integrated FET switch for overcharge, overdischarge, and short-circuit protection.

The UCC3911 is a two-cell lithium-ion (Li-Ion) and lithium-polymer (Li-Pol) battery pack protector device that incorporates an on-chip series FET switch thus reducing manufacturing costs and increasing reliability.

The UCC3585 is a synchronous buck controller providing high-efficiency power conversion for output voltages down to 0.9 V with ±1% DC accuracy, operating from a 3.0 V to 5.5 V input.

The UCC3585 synchronous buck controller provides flexible high efficiency power conversion for output voltages as low as 0.9 V with ensured ±1% dc accuracy. With an input voltage range of 3.0 V to 5.5 V, it is the ideal choice for 3.3 V only, 5.0 V only, or other low voltage systems.

The UC3886 family of PWM controller ICs is designed for DC-to-DC converters with average current mode control.

The UC3874 family of synchronous step-down (Buck) regulators provides high efficiency power conversion from an input voltage range of 4.5 to 36 volts.

The UC3849 family of average current mode controllers accurately accomplishes secondary side average current mode control.

The UC3853 provides simple, yet high performance active power factor correction. Using the same control technique as the UC1854, this 8-pin device exploits a simplified architecture and an internal oscillator to minimize external component count.

The UC3838 and the UC3838A family of magnetic amplifier controllers contains the circuitry to generate and amplify a low-level analog error signal along with a high voltage-compliant current source.

The TPS6113x devices provide a complete power supply solution for products powered by either a one-cell Li-Ion or Li-Polymer, or two- to four-cell Alkaline, NiCd, or NiMH batteries. The devices can generate two regulated output voltages.

The TPS6110x devices provide a complete power supply solution for products powered by either one or two Alkaline, NiCd, or NiMH battery cells.

Programmable dual output controller for DSP, FPGA and microcontroller core and I/O voltages.

The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion.

The TL594 incorporates all the functions required in the construction of a pulse-width-modulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the systems engineer the flexibility to tailor the power-supply control circuitry to a specific application.

The TL1451AEVM-166 (SLVP166) is an evaluation module for a dual buck converter using the TL1451A PWM regulator controller.

Integrated Switch TDA21201 incorporates an intelligent MOSFET driver and two Power MOSFETs in a single package to form a fully integrated and optimized power stage of a DC/DC synchronous buck converter.

Integrated Switch (MOSFET Driver and MOSFETs) for DC/DC synchronous buck converter.

Controller for Switch Mode Power Supplies Supporting Low Power Standby and Power Factor Correction

Controller for Switch Mode Power Supplies supporting low power standby and power factor correction.

The PTQA series of power modules are single-output isolated DC/DC converters, housed in an industry standard quarter-brick package. These modules are rated up to 100W with a maximum load current of up to 30A.

The PTQA series of power modules are single-output isolated DC/DC converters, housed in an industry standard quarter-brick package. These modules are rated up to 100W with a maximum load current of up to 30A.

10-W, 36-V to 75-V INPUT, 1500-V ISOLATION, DC/DC CONVERTERS. The PTMA40XX is a series of 10-W rated isolated dc/dc converters, designed to operate from a standard -48-V telecom central office supply.

The PTHxx010Y series are ready-to-use switching regulator modules from Texas Instruments designed specifically for bus termination in DDR and QDR memory applications.

The PTB4851x series of isolated DC/DC converter modules produce a complementary pair of regulated supply voltages for powering line-driver devices in xDSL telecom applications.

Dual-output, 48-V input isolated DC/DC converter for xDSL applications.

The PTB4850x power modules are a dual-output isolated DC/DC converter, designed to provide the supply voltages for AC-7 based xDSL applications.

The PTB4850x power modules are a dual-output isolated DC/DC converter, designed to provide the logic supply voltages for AC-7 based xDSL applications.

The PT8139 Excalibur™ module is a high performance integrated switching regulator (ISR), housed in a solderable, 31-pin space-saving copper package. Operating from an input voltage of +12V, the module provides up to 30A of power over a range of low-output voltages.

The PT8120 Excalibur™ power modules are a family of high-output, high-efficiency, fully integrated switching regulators (ISRs), housed in a solderable 31-pin space-saving copper package.

The PT8120 Excalibur™ power modules are a family of high-output, high-efficiency, fully integrated switching regulators (ISRs), housed in a solderable 31-pin space-saving copper package.

The PT8120 Series are 30-A, 12-V input programmable integrated switching regulators (ISRs) housed in a solderable 31-pin space-saving copper package. They provide up to 30A of output current at output voltages as low as 0.8V, programmable via a 5-bit input code.

The PT8120 Excalibur™ power modules are a family of high-output, high-efficiency, fully integrated switching regulators (ISRs), housed in a solderable 31-pin space-saving copper package.

PT8100 Series 40-A 3.3/5-V Input Programmable Integrated Switching Regulator. The PT8100 Excalibur™ power modules are a family of high-output, high-efficiency, fully integrated switching regulators (ISRs).

PT8100 Series 40-A 3.3/5-V Input Programmable Integrated Switching Regulator

PT79SR100 is a line of Negative Input/Negative Output 3-terminal Integrated Switching Regulator with high efficiency >85% and maximum output current of -1.5 Amps.

PT79SR100 Series is a line of negative input/negative output 3-terminal integrated switching regulators with 1.5A output current.

PT79SR100 Series is a line of 1.5 Amp negative step-down integrated switching regulators.

The PT79SR100 is a line of Negative Input/Negative Output 3-terminal Integrated Switching Regulator with a maximum output current of -1.5 Amps and laser trimmed output voltages.

PT79SR100 Series is a line of -1.5 Amp Negative Step-Down Integrated Switching Regulator.

PT79SR100 Series is a line of 1.5 Amp negative step-down integrated switching regulators with self-contained inductor, short circuit protection, and over-temperature protection. They offer high efficiency (>85%) and are designed for negative input/negative output applications.

PT79SR100 Series is a line of -1.5A negative step-down integrated switching regulators with self-contained inductor, short circuit and over-temperature protection.

PT79SR100 Series -1.5 Amp Negative Step-Down Integrated Switching Regulator

PT79SR100 Series is a -1.5 Amp negative step-down integrated switching regulator.

PT78ST200 Series 12V 2 Amp Positive Step-Down Integrated Switching Regulator

The PT78ST100 is a series of wide input range, 3-terminal regulators. These ISRs have a maximum output current of 1.5 Amps and an output voltage that is laser trimmed to a variety of industry standard voltages.

The PT78ST100 is a series of wide input range, 3-terminal regulators with a maximum output current of 1.5 Amps and an output voltage that is laser trimmed to a variety of industry standard voltages.

PT78ST100 Series is a 1.5 Amp positive step-down integrated switching regulator with wide input range and laser-trimmed output voltages.

PT78NR200 series creates negative output voltage from a positive input voltage.