LTC4358CFE#PBF [Analog Devices]

LTC4358CFE#PBF Overview

There is a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case that comes with it. In this case, it is suitable to pack the part in a Tube case. In this case, the part is mounted in the direction of Surface Mount. The voltage that is applied to the circuit is 9V~26.5V. There must not be a minimum operating temperature of 0°C~70°C for this component. The component connected to N+1 Power Supplies, High Availability is a good match for this component. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. In this case, the FET type can be recognized as N-Channel. 16 terminations are available in the part in order to meet your needs. There are 16 pins on the board and it is designed with them. A part based on LTC4358 is used in this part. The purpose of this is to make sure that the supply current for the component at 600?A is running as it should be. It is important to note that the part has 16 pins. It is important that Vsup for this part does not fall below 9V. A maximum supply voltage is achieved as soon as Vsup reaches 26.5V, which means it is at its maximum level. There are outputs that can be connected to 1. It is possible for the chip to function when the output current conducts under the 5A axis.

LTC4358CFE#PBF Features

in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case
FET Type: N-Channel
16 terminations
1 outputs

LTC4358CFE#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC4358CFE#PBF Ideal Diode controller applications.

• Active OR-ing of Redundant (N+1) Power Supplies
• Automotive battery protection
• ADAS domain controller
• Camera ECU
• Head Unit
• USB HUBs
• Active ORing for redundant power
• Factory automation and control - PLC digital output modules
• Industrial motor drives
• Industrial transport