SY88309BLEY [Microchip]

SY88309BLEY Overview

There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Limiting-type. Upon delivery, op amp ic is packaged in a Tube case. 10 pins are located on the operational amplifiers. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 38mA . This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits Differential signals. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 3.3V. It is recommended that you use an 38mA power supply with this electrical part in order for it to operate correctly. Under 3.6V is the minimum supply voltage for this electric component. Over 3V is a recommended supply voltage for buffer ampsIn order for the op amp resistance to remain within the 50Ohm range, the op amp should be tested.

SY88309BLEY Features

Output Type: Differential
Resistance of 50Ohm

SY88309BLEY Applications

There are a lot of Microchip Technology
SY88309BLEY Instrumentational OP Amps applications.

• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation