N25Q256A11ESF40F Overview

In addition, memory ics is available in a Tape & Reel case as well. The comprehensive working procedure of this part involves 1 functions. A 16-pin package containing this memory device is used to house this device. There is a note indicating that this memory chip operates at an 1.8 V volt supply voltage. There is a nominal supply current rating of 20 mA for this memory component. This chip features all the merits of a conventional chip, but it also features SPI-COMPATIBLE SERIAL BUS INTERFACE to improve system performance. As for power supplies, this memory chip requires just 1.8 V . There must not be a minimum operating temperature of less than -40 °C for this device. A temperature of no more than 85 °C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Its SPI-type serial bus helps transfer data to the CPU efficiently. In order to operate your device, you will need to provide a maximum supply current of 0.02 mA. A programming voltage of 1.8 V is required to change a nonvolatile memory array's state. Usually, this memory ics falls under the Flash Memories component category. Ideally, this part should be supplied with a voltage of at least 1.7 V. An operating voltage of no more than 2 V is required. A frequency of 108 MHz is used to process the data on this memory chip. With respect to voltage, the chip works well under a voltage of 1.7 V. 5 volts. This chip contains a FLASH type of memory IC. In general, this is a NOR TYPE device. A device such as this has the number 16 of terminals within it.

N25Q256A11ESF40F Features

16 Pins
Operating Supply Voltage:1.8 V
Additional Feature:SPI-COMPATIBLE SERIAL BUS INTERFACE
Freguency at 108 MHz
108 MHz terminals

N25Q256A11ESF40F Applications

There are a lot of Micron
N25Q256A11ESF40F Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card