74AC273MTC [Onsemi]

74AC273MTC Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AC series. This D flip flop should not have a frequency greater than 175MHz. There is 40μA quiescent consumption. The 74AC273 family contains it. This T flip flop has a capacitance of 4.5pF farads at the input. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 8output lines. A total of 3input lines have been provided. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis the maximum supply voltage it supports. We are able to achieve a frequency of 175MHz.

74AC273MTC Features

Tube package
74AC series
20 pins
8 Bits

74AC273MTC Applications

There are a lot of ON Semiconductor
74AC273MTC Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory