74AC373SC [Onsemi]

74AC373SC Overview

In the package 20-SOIC (0.295, 7.50mm Width), it can be found. A Tube package is used to package it. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~6V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74AC family. An electronic part with 8 bits is designed. 74AC373 is the family name of it. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. It consists of 2 input lines from which an electronic circuit can be built. Its 24mA output current allows for maximum design flexibility. 8 output lines generate the binary equivalent of the input lines. In total, it has 1 elements. The superior flexibility of the system is achieved through its use of 8 circuits. In the low level output current, the value is set to 24mA. In the high level output current, the value is set to -24mA. It is recommended that the operating temperature not exceed 85°C. Temperatures above -40°C should be used. The supply voltage is limited to 6V. A minimal voltage of 2V is needed to operate it.

74AC373SC Features

20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements

74AC373SC Applications

There are a lot of ON Semiconductor
74AC373SC Latches applications.

• Motor Drives
• PCs and Notebooks
• Hammer
• Parallel data storage
• Digital bus buffer
• Flip-flops
• Parallel data synchronization
• Parallel data storage
• Shift register
• Pattern generators