74AC374MTC [Onsemi]

74AC374MTC Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is included in the package Tube. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The 74ACseries comprises this type of FPGA. It should not exceed 155MHzin terms of its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 40?Aof quiescent current. The object belongs to the 74AC374 family. Input capacitance of this device is 4.5pF farads. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 8bits are used in this part. To achieve this superior flexibility, 8 circuits are used. With an output current of 24mA, this device offers maximum design flexibility. There are 8 output lines on it. Currently, there are 1 lines of input. There is -24mA output current at the high level. There is 24mA output current at the low level. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 2V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. 155MHzis the maximum frequency that can be achieved.

74AC374MTC Features

Tube package
74AC series
20 pins
8 Bits

74AC374MTC Applications

There are a lot of ON Semiconductor
74AC374MTC Flip Flops applications.

• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers