74AC821SPC [Onsemi]

74AC821SPC Overview

24-DIP (0.300, 7.62mm)is the way it is packaged. It is included in the package Tube. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. Powered by a 2V~6Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The 74ACseries comprises this type of FPGA. It should not exceed 160MHzin terms of its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 80?Aof quiescent current. The object belongs to the 74AC821 family. Input capacitance of this device is 4.5pF farads. The electronic part is mounted in the way of Through Hole. A total of 24pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 10bits are used in this part. To achieve this superior flexibility, 1 circuits are used. There are 3 output lines on it. Currently, there are 1 lines of input. There is -24mA output current at the high level. There is 24mA output current at the low level. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 2V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. 165MHzis the maximum frequency that can be achieved.

74AC821SPC Features

Tube package
74AC series
24 pins
10 Bits

74AC821SPC Applications

There are a lot of ON Semiconductor
74AC821SPC Flip Flops applications.

• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers