NOIM1SM9600A-QDC [Onsemi]

The MANO9600 is a rolling shutter CMOS image sensor with aresolution of 3840 x 2500 pixels.The high sensitivity 2.4 μm x 2.4 μm pixels supports correlateddouble sampling readout reducing noise and increasing dynamicrange.The MANO9600 has a high level of programmability using a four wire serial peripheralinterface that enables the user to read out specific regions of interest.Higher frame rates are achieved with single ROI or sub-sampledreadout modes. The sensor has built-in features for bias controland power supply regulation.The sensor has on-chip programmable gain amplifiers and 10-bitA/D converters. The integration time and gain parameters can bereconfigured without any visible image artifact. Optionally theon-chip automatic exposure control loop (AEC) controls theseparameters dynamically. The image's black level is eithercalibrated automatically or can be adjusted by adding a userprogrammable offset.The image data interface of the M1-SN/SE part consists of fourLVDS lanes running at 620 Mbps, facilitating frame rates up to20 frames per second. A separate synchronization and clockchannel containing payload information is provided to facilitatethe image reconstruction at the receive end. The M2-SN/SE partprovides a parallel CMOS output interface at reduced frame rate.The MANO 9600 is packaged in a 52-pin LCC package.