BD6069GUT-E2 [ROHM]

BD6069GUT-E2 Overview

As a result of its 8-WFBGA, CSPBGA package, it helps to save board space on the board. It has 1 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -30°C~85°C TA.It is clear that Backlight will benefit from the program.Using the frequency of 1MHz, it operates.In order for it to operate, it has 8 terminations.The base is configured with 8 pins.If the voltage supply is lower than 2.7V, undetermined failures may occur.There are 4 segments in it.This is mounted by Surface Mount.You can find this LED driver under the base part number BD606*.The output voltage of the device is 18V.In addition, it can also be categorized into Switching Regulator or Controllers based on its characteristics.When the supply current should be less than 2?A, the device will provide high efficiency.Powering systems requires 5.5V voltages.

BD6069GUT-E2 Features

Available in the 8-WFBGA, CSPBGA package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 5.5V

BD6069GUT-E2 Applications

There are a lot of ROHM Semiconductor
BD6069GUT-E2 LED Driver ICs applications.

• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices
• Stage Lighting and Signage