SC600AIMSTRT [Semtech]

SC600AIMSTRT Overview

There is also a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~150°C TJ, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 650kHz.This LED driver is configured with a base of 10 pins.If the voltage supply is below 2.5V, undetermined failures may occur.It's mounted by Surface Mount.Under the base part number SC600, you will find this LED driver.Ideally, the supply voltage should be 6.5V.It produces a voltage of 5V volts.An optimized supply voltage of 6.5V is provided.Temperatures should not exceed 150°C in order to ensure stable operation.There is no current available to supply to the load.Maintaining a temperature above -40°C is essential for stabilizing operation.A component of the mAhXLife? series, this LED driver is widely used in a variety of applications.

SC600AIMSTRT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~150°C TJ
Frequency of 650kHz

SC600AIMSTRT Applications

There are a lot of Semtech Corporation
SC600AIMSTRT LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices