74ACT374TTR [STMicroelectronics]

74ACT374TTR Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74ACT series. This D flip flop should not have a frequency greater than 260MHz. A total of 1elements are present in it. There is 4?A quiescent consumption. A total of 20terminations have been recorded. The 74ACT374 family contains it. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 3pF farads at the input. It belongs to the family of electronic devices known as ACT. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. This flip flop has a total of 2ports. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 3output lines.

74ACT374TTR Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

74ACT374TTR Applications

There are a lot of STMicroelectronics
74ACT374TTR Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory