Part No:
M27C1001-12C1
Category:
Memory IC Development Tools
Description:
5V V Surface Mount 32 Pin Memory IC M27C1001 1 Mb kb 13.97mm mm 50mA mA
Package:
-
Datasheet:
-
Production Status:
In Stock Status:
Specification
Moisture Sensitivity Level (MSL)
Peak Reflow Temperature (Cel)
Time@Peak Reflow Temperature-Max (s)
Products Detail
M27C1001-12C1 Overview
In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 32-LCC (J-Lead) case surrounds memory ics. It is estimated that the memory size on the chip is 1Mb 128K x 8. As with most mainstream devices, this one uses EPROM-format memory. Due to its wide temperature range of 0°C~70°C TA, this device is well suited to a wide range of applications that require high performance. With 4.5V~5.5V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 32 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. A device's base part number, M27C1001, is often used in order to identify similar components. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 50mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with 00.1.142, which boosts the performance of your system. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. OTP ROMs components are usually considered types of this component. Using this memory chip, you will be able to process data at a speed of 120GHz times per second. An 30mA volt supply current is recommended for this device
M27C1001-12C1 Features
Package / Case: 32-LCC (J-Lead)
32 Pins
Operating Supply Voltage:5V
Additional Feature:00.1.142
I/O Type: COMMON
Freguency at 120GHz
120GHz terminals
M27C1001-12C1 Applications
There are a lot of STMicroelectronics
M27C1001-12C1 Memory applications.
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
Key Features
No key features available
Application scenarios
No application scenarios available
Documents