PSD813F2A-90J [STMicroelectronics]

PSD813F2A-90J Overview

It can be seen that the ICs has been enclosed within the package 52-LCC (J-Lead).Contains this module is the package Tube.Surface Mount is the way in which integrated circuit is mounted.There are numerous integrated circuits that make use of this type of Programmable Peripherals IC.By searching for the PSD813F family, similar integrated circuit systems may be found.It is appropriate to apply the ICs to 8-Bit MCU Peripherals.52 terminations were found on the ICs solutions.In this ICs applications, there are 52 pins that are available for use.In this case, the logic gate IC should be run at 5V.A suggested mounting method for this ICs application would be to mount it by Surface Mount.It should be used at integrated circuit chip's temperatures below 70°C to maximize its performance.A integrated circuit system should not operate at temperatures below 0°C.Total pin count is 52.The integrated circuit can be operated at a supply voltage of 5.5V.This integrated circuit requires a supply voltage of at least 4.5V.It is included in the subcategory Other Microprocessor ICs.The circuit is capable of delivering a voltage at 5V.The logic IC is set to 18MHz in terms of frequency.Memory type FLASH is used in this integrated circuit chip.Please note that the size of this memory is 1MB.On this logic ICs, there are 4 ports embedded within it.

PSD813F2A-90J Features

Applications : 8-Bit MCU Peripherals
Supply power of 5V
Memory Type : FLASH
Memory Size: 1MB

PSD813F2A-90J Applications

There are a lot of STMicroelectronics
PSD813F2A-90J Specialized ICs applications.

• Industrial Instruments
• PC-Based Instruments
• Portable Instruments
• Membrane Keypads
• Authentication of Medical Sensors and Tools
• Secure Management of Limited Use Consumables
• IoT Node Authentication
• Peripheral Authentication
• Reference Design License Management
• Printer Cartridge Identification and Authentication