STCF02PNR [STMicroelectronics]

STCF02PNR Overview

In order to save board space, the 20-VFQFN Exposed Pad package is used. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.It emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits of Camera Flash are considerable.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 20 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.7V.A total of 1 segments have been created.It's mounted in Surface Mount.Part number STCF02 represents this LED driver.It is acceptable to supply voltages of 5.5V.2.5V~5.1V is the output voltage.In addition, it has 20 pins.Depending on its characteristics, it is classified into Display Drivers.For highest efficiency, it works with a minimal supply voltage of 2.7V.Loads can only be powered by 600mA current.As long as the switching frequency is maintained at 1.8MHz, this electronic component is able to perform all of its functions properly.When no external factors are present, there is 3?A current consumption.

STCF02PNR Features

Available in the 20-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.8MHz

STCF02PNR Applications

There are a lot of STMicroelectronics
STCF02PNR LED Driver ICs applications.

• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps