STD22NM20NT4 [STMicroelectronics]

STD22NM20NT4 Overview

The input capacitance parameter, CI, is defined as the capacitance between the input terminals of an op amp with either input grounded, and this device's maximal input capacitance is 800pF @ 25V.The drain current is the maximum continuous current the device can conduct, and the continuous drain current (ID) of this device is 22A. Drain-source breakdown voltage is the VDS at which a specified value of ID flows, with VGS=200V. And this device has 200V drain to source breakdown voltage.Turn-Off delay time is the time taken to charge the input capacitance of the device before drain current conduction can start, and its turn-off delay time is 40 ns.IDM is the maximum rated peak drain current for a power MOSFET, and its maximal pulsed drain current is 88A.The gate-source voltage, VGS, of a FET transistor is the voltage that falls across the gate-source terminal of the transistor and its voltage can be 20V.Threshold voltage is the point at which an electrical device is set to activate any one of its operations, and this transistor has 4.2V threshold voltage. By using drive voltage (10V), this device helps reduce its overall power consumption.

STD22NM20NT4 Features

a continuous drain current (ID) of 22A
a drain-to-source breakdown voltage of 200V voltage
the turn-off delay time is 40 ns
based on its rated peak drain current 88A.
a threshold voltage of 4.2V

STD22NM20NT4 Applications

There are a lot of STMicroelectronics
STD22NM20NT4 applications of single MOSFETs transistors.

• LCD/LED TV
• Consumer Appliances
• Lighting
• Uninterruptible Power Supply
• AC-DC Power Supply
• Synchronous Rectification for ATX 1 Server I Telecom PSU
• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools