STLD20CP1PQR [STMicroelectronics]

STLD20CP1PQR Overview

Using its 16-VFQFN Exposed Pad package, it is possible to save board space. LED drivers design with 2 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.Backlight, Camera Flash has considerable advantages.A frequency of 1.3MHz is used to operate it.The operation of this system is supported by 16 terminations.This configuration is built upon 16 pins.It is possible that failures will occur if the voltage supply is below 2.8V.The mount is in the way of Surface Mount.The LED driver is available under the part number STLD20.Its output voltage is 17V.The device has a pin count of 16.In addition to Power Management Circuits, it is also classified by its characteristics.It is necessary to power systems with a voltage of 6VThere is no external factor that can consume current, so 700mA current is consumed.Transmissions are currently available on 1 channels.

STLD20CP1PQR Features

Available in the 16-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.3MHz
Supply voltage of 3.4V
Operating with the supply voltage of 6V

STLD20CP1PQR Applications

There are a lot of STMicroelectronics
STLD20CP1PQR LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights