Part No:
STM706PDS6E
Category:
Power Management ICs
Description:
3V 8 Terminals 8-Pin STM706 Voltage supervisor 1 Channels Min 1V Max 5.5V
Package:
-
Production Status:
In Stock Status:
Specification
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Moisture Sensitivity Level (MSL)
Type
Simple Reset/Power-On Reset
Peak Reflow Temperature (Cel)
Time@Peak Reflow Temperature-Max (s)
Number of Voltages Monitored
Min Reset Threshold Voltage
Max Reset Threshold Voltage
Products Detail
STM706PDS6E Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 40μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by STM706. It requires 3/5V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 60μA.
STM706PDS6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
40μA operating supply current
STM706PDS6E Applications
There are a lot of STMicroelectronics
STM706PDS6E Voltage Supervisors applications.
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
- Stable power system
- Sensitive sensors
- Efficient information transmission
- Functional modules
- Consumer electronics
Key Features
No key features available
Application scenarios
No application scenarios available
Documents
