STP9NM60N [STMicroelectronics]

STP9NM60N Overview

As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 452pF @ 50V.This device conducts a continuous drain current (ID) of 6.5A, which is the maximum continuous current transistor can conduct.The drain current is the maximum continuous current this device can conduct, which is 9A.When the device is turned off, a turn-off delay time of 52.5 ns occurs as the input capacitance charges before drain current conduction commences.Pulsed drain current is maximum rated peak drain current 26A.Before drain current conduction can begin, the device's turning-on delay time takes time to charge its input capacitance. This delay time is 28 ns.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 25V.Activation of any electrical operation happens at threshold voltage, and this transistor has 3V threshold voltage.A normal operation of the DS requires keeping the breakdown voltage above 600V.This transistor requires a drain-source voltage (Vdss) of 600V.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).

STP9NM60N Features

a continuous drain current (ID) of 6.5A
the turn-off delay time is 52.5 ns
based on its rated peak drain current 26A.
a threshold voltage of 3V
a 600V drain to source voltage (Vdss)

STP9NM60N Applications

There are a lot of STMicroelectronics
STP9NM60N applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching