STU8NM50N [STMicroelectronics]

STU8NM50N Overview

In this case, the MOSFET is susceptible to avalanche breakdown, applied energy is termed avalanche energy, and the avalanche energy rating (Eas) for the MOSFET is 140 mJ.As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 364pF @ 50V.This device conducts a continuous drain current (ID) of 5A, which is the maximum continuous current transistor can conduct.The drain current is the maximum continuous current this device can conduct, which is 5A.When the device is turned off, a turn-off delay time of 25 ns occurs as the input capacitance charges before drain current conduction commences.Pulsed drain current is maximum rated peak drain current 20A.Before drain current conduction can begin, the device's turning-on delay time takes time to charge its input capacitance. This delay time is 7 ns.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 25V.Activation of any electrical operation happens at threshold voltage, and this transistor has 3V threshold voltage.A normal operation of the DS requires keeping the breakdown voltage above 500V.This transistor requires a drain-source voltage (Vdss) of 500V.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).

STU8NM50N Features

the avalanche energy rating (Eas) is 140 mJ
a continuous drain current (ID) of 5A
the turn-off delay time is 25 ns
based on its rated peak drain current 20A.
a threshold voltage of 3V
a 500V drain to source voltage (Vdss)

STU8NM50N Applications

There are a lot of STMicroelectronics
STU8NM50N applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching