VND830AEP-E [STMicroelectronics]

VND830AEP-E Overview

It is packaged in the manner of a Tube.There is a 24-PowerBSOP (0.295, 7.50mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VND830 family consists of this type.In order to operate, the 24 pins are used.In order to meet the operation criteria, the maximum output current drops to 6A.As a result, it is mounted in the manner of Surface Mount.A total of 24 pins are included in this LED driver.In this LED driving board, there is 60mOhm resistance.There is an electrical component included in the VIPower? series.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.For its operation, a maximum current requirement of 7mA is required.

VND830AEP-E Features

Resistance of 60mOhm

VND830AEP-E Applications

There are a lot of STMicroelectronics
VND830AEP-E Power Switches ICs applications.

• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards