TLC2940IPW [Texas Instruments]

TLC2940IPW Overview

As part of the TSSOP package, this clock generator is embedded. There are 8 terminations found in this file. To operate this time clock generator, 3V voltage should be applied. 3.15V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.85V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. A clock PLL that starts up at a lower temperature may not function. In general, this clock PLL is considered a Other Oscillators device. Elemental destruction can occur when the supply current is exceeded (higher than 10mA)A steady structure and advanced building process allow this clock generator to clock at a maximum rate of 50MHz MH50MHz. It is possible that this electronic frequency generator runs at its lowest possible frequency sometimes; But don't panic; Follow the instructions in the datasheet.

TLC2940IPW Features

Available in the TSSOP
Supply voltage of 3V

TLC2940IPW Applications

There are a lot of Texas Instruments
TLC2940IPW Clock Generators applications.

• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems