Name: XCC3350MODENIAMOZR
Brand: Texas Instruments
SKU: XCC3350MODENIAMOZR

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC335xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

CC3350MOD: A 2.4GHz and 5GHz Wi-Fi 6 companion module
CC3351MOD: A 2.4GHz and 5GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC335xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 a/b/g/n) and Wi-Fi 5 (802.11ac). These CC335xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC335xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC335xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

Key Features

Wi-Fi 6 (802.11ax)
Bluetooth Low Energy 5.4 in CC33x1MOD
Companion module to any processor or MCU host capable of running a TCP/IP stack
Integrated 2.4GHz and 5GHz PA for a complete wireless system with up to +18dBm output power
Operating temperature: –40°C to +85°C
Application throughput up to 50Mbps
Regulatory Certification (in progress)
- FCC
- IC/ISED
- ETSI/CE
- MIC (TELEC)
QuickTrack Qualified
Bluetooth Controller Subsystem Qualified

Extended Features

Wi-Fi 6
- 2.4GHz and 5GHz, 20MHz, single spatial stream
- MAC, baseband, and RF transceiver with support for IEEE 802.11 a/b/g/n/ax
- Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger frame for improved efficiency
- Hardware-based encryption and decryption supporting WPA2 and WPA3
- Excellent interoperability
- Support for 4-bit SDIO or SPI host interfaces
Bluetooth Low Energy 5.4
- LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
- Host controller interface (HCI) transport with an option for UART or shared SDIO
- Internal coexistence mechanism with Wi-Fi to share the same antenna
Enhanced Security
- Secured host interface
- Firmware authentication
- Anti-rollback protection
Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
Optional antenna diversity or selection
3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
Clock sources
- 40MHz XTAL fast clock (Integrated into the module)
- Internal slow clock or external 32.768kHz slow clock
Small package size
- Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch