OP999 [TT Electronics]

OP999 Overview

The photodiodes are packaged in the Bulk to prevent damage. Continually operating in reverse-bias mode, a photodiode's maximum voltage is 60V. In reverse-bias mode, the voltage for the photodiodes should not exceed 60V continuously. There are 2 pins on the photodiodes. It is possible for the photodiodes within a circuit to release 100mW heat. When photodiodes are operating, the temperature should not exceed 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. Generally, a circuit's maximum heat release should be 100mW. In order for current to flow across a photodiode, the voltage must be 1.2V. In reverse-bias mode, the photodiodes could supply 60V. Photodiodes exhibit 1nA current even in the absence of light input.

OP999 Features

Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
Viewing Angle: 40°

OP999 Applications

There are a lot of TT Electronics/Optek Technology
OP999 Photodiodes applications.

• Infrared remote control
• Infrared data transmission
• Photo interrupters
• Shaft encoders
• Electronic Equipment
• Industrial Automation
• Machine Controls
• Light Barriers
• Vision Controls
• Measurement Levelling