XC17S40SO20C [Xilinx]

XC17S40SO20C Overview

FPGA uses a nice 20-SOIC (0.295, 7.50mm Width) package that makes FPGA easy to use.External packaging for the Tube series.0°C~70°C license holder.OTP is the program that allows it to be programmed.This device is fed with a voltage of 4.75V~5.25V which is applied to it.There is a memory device mounted in Surface Mount position for this device.There is a limit of 400kb MB for the amount of data that can be stored.Look for "XC17S40" for other related parts.The supply voltage of the device must be 5V in order to operate correctly.There are different functions that can be applied on the 20 axis when it comes to terminating.As long as the maximum voltage of the memory device is 5.25V, then the memory device can be used.FPGA is imperative that the voltage of the device supply is at least 4.75V if the device is to work properly.An example of a MEMORY CIRCUIT memory chip can be seen in the picture below.The 20 pins are on the board.The memory chip is allowed to operate at a voltage that is no greater than 0.01mA.As part of the package, the part comes with a set of 20 pins.I think it's important to point out that this is a memory IC that has a 10MHz frequency that can be operated at.There is a configuration of COMMON for the memory's I/O.A power supply that is rated at 5V is recommended for use with this product.

XC17S40SO20C Features

Operating temperature: 0°C~70°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.

XC17S40SO20C Applications

There are a lot of Xilinx Inc.
XC17S40SO20C applications of configuration proms for FPGAs.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card