STRG06TR [STMicroelectronics]

The STRG06 is a high performance digital controller featuring the innovative and patented ST RVCOT™ control loop that allows to implement a high efficiency DC-DC converter in single stage conversion directly from the 60 V bus.

In combination with the STRG02 and STRG04, the device is able to implement a scalable power supply with output power ranging from 50 W up to > 300 W featuring auto cell shedding and PFM to optimize the overall efficiency maintaining a > 90% baseline over the whole current range without compromising the load transient and DVID response.

The STRG06 device can be fully configured through the PMBus™ to minimize the external component count. A full set of telemetry is provided including the BBR, CFP and primary / secondary side telemetry.

The device assures fast and independent protection against the positive and negative OC (per cells), over/undervoltage and FB disconnection.

The STRG06 is available in a VFQFPN68, 8 x 8 mm package with an exposed pad.

• High performance resonant digital control loop RVCOT™
• Drives up to 6 cells with STRG02 and STRG04, from 50 W up to > 300 W
• Compliant with Intel VR12.5™ and VR13 protocol
• Fully configurable through PMBus™ Rev1.2
  • Telemetry for primary and secondary
  • Full IC configuration / management
  • Voltage positioning
• Advanced power management
  • Auto cell shedding with PFM
  • Low power 1.8 V logic
• Programmable protections
  • OV / UV and FB disconnection
  • Pos/neg OC per cell
  • Current sharing error
  • Black box recorder (BBR)
  • Catastrophic fault precursor (CFP)
• Embedded non-volatile memory (NVM)
• Primary μC interface for telemetry (PuC)
• Single-wire synchronous rectifier drive
• RST and EN1V8 for low power mode
• VFQFPN68, 8 x 8 mm package