VNQ690SPTR-E [STMicroelectronics]

VNQ690SPTR-E Overview

The package is in the form of a Tape & Reel (TR).It is included in the package 10-PowerSOIC (0.370, 9.40mm Width).The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 4 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It is part of the VNQ660 family of LED drivers.It contains 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.Currently, there are 4 functions associated with the lighting driver.This results in the maximum output current dropping to 10A to meet the operation criteria.The supply voltage can be 13V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 10 pins are present on it.Lighting drivers with 90mOhm resistance are used.A component of this type is included in the VIPower? series.This case results in a 10A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this part, the power supply is set to 13V.When using this LED driving board, it is recommended that the supply voltage is set to 36V.There is a maximum input voltage of 36V volts.The input voltage minimum is 5.5V volts.There is a maximum current requirement of 6mA for its operation.

VNQ690SPTR-E Features

Supplied from 13V
Resistance of 90mOhm

VNQ690SPTR-E Applications

There are a lot of STMicroelectronics
VNQ690SPTR-E Power Switches ICs applications.

• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD