XC17S30XLPDG8C Overview

This package is based on a neat 8-DIP (0.300, 7.62mm) package which is used by it.Packaging for the external use of Tube.In the state of 0°C~70°C, licensed to work.Using the OTP axis, it can be programmed to do whatever you want.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Through Hole.Currently, data storage can only store data up to 300kb bytes.Try searching "XC17S30XL" for more parts.There is a voltage requirement of 3.3V for supplying it with power.FPGA is possible to connect different functions on the 8 axis at different terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.If the device needs to be supplied with power, then a minimum voltage of 3V is required.Reflow soldering should be done at 250°C maximum.In this case, it has 8 pins.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.005mA.There is a set of 8 pins that are included with the part.I would like to mention that this is a memory IC that will be able to work at a 10MHz frequency, so I will mention that.The memory's I/O is configured to be COMMON in terms of its configuration.The use of a 3.3V power supply is recommended in order to achieve best results.There is a memory type that is known as a PROM memory.

XC17S30XLPDG8C Features

Operating temperature: 0°C~70°C.
OTP program capability.
COMMON I/O equipped.
PROM memory

XC17S30XLPDG8C Applications

There are a lot of Xilinx Inc.
XC17S30XLPDG8C applications of configuration proms for FPGAs.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)