Use this Capacitor Energy (E) and RC Time Constant Calculator to compute the energy stored in a capacitor and its RC time constant. Calculate the time constant (T) using the capacitance (C) and load resistance (R). Calculate the energy (E) stored in the capacitor using voltage (V), capacitance (C), and load resistance (R). Simply enter the known values, and the calculator instantly provides the resulting energy and time constant, making it easy to analyze capacitor behavior in your circuits.
E = V^2*C/2
Energy stored in the capacitor (Joules)
TC = R*C
RC time constant (seconds)
1/e = 36.8%
Remaining value after one time constant (discharging)
Introduction
This tool allows you to calculate the Time Constant () and the Stored Energy () of a capacitor in an RC circuit.
What is the Time Constant? The Time Constant (represented by the Greek letter Tau, ) is a measure of how quickly a capacitor charges or discharges through a resistor. A capacitor cannot change its voltage instantly; the series resistor limits the current, creating a time delay.
The Formula: The transient response time is measured in seconds:
Where:
Key Rule: It takes exactly 5 Time Constants () for a capacitor to be considered "fully charged" (reaching ~99.3% of source voltage) or "fully discharged" (dropping to ~0.7%).
The behavior of Voltage and Current differs depending on whether the capacitor is charging or discharging.
When connected to a DC supply, the capacitor voltage increases while the charging current decreases.
| Time Constant | Calculation | Capacitor Voltage () | Circuit Current () |
|---|---|---|---|
| 0.5 |
When the source is removed and the capacitor discharges through a resistor, both voltage and current decrease over time.
| Time Constant | Calculation | Capacitor Voltage () | Discharge Current () |
|---|---|---|---|
| 0.5 |
What is Capacitor Energy? A capacitor stores potential energy in the electric field created between its plates. Unlike a battery, which stores energy chemically, a capacitor stores energy electrostatically.
The Energy Formula: The energy stored is half the product of the charge and the voltage. The standard formula is:
Where:
Alternative Formulas: Using the relationship , we can express energy in three ways:
While capacitors store Joules, large-scale electrical consumption (like household appliances) is often calculated in Kilowatt-hours (kWh).
Formula:
Note: To convert Watts to Kilowatts, divide by 1,000. To convert Seconds to Hours, divide by 3,600.
| 39.3% |
| 60.7% |
| 0.7 | 50.3% | 49.7% |
| 1.0 | 63.2% | 36.8% |
| 2.0 | 86.5% | 13.5% |
| 3.0 | 95.0% | 5.0% |
| 4.0 | 98.2% | 1.8% |
| 5.0 | 99.3% (Full) | 0.7% (Zero) |
| 60.7% |
| 60.7% |
| 0.7 | 49.7% | 49.7% |
| 1.0 | 36.8% | 36.8% |
| 2.0 | 13.5% | 13.5% |
| 3.0 | 5.0% | 5.0% |
| 4.0 | 1.8% | 1.8% |
| 5.0 | 0.7% (Empty) | 0.7% (Zero) |
The energy (E) is calculated using E = V squared × C / 2 / Voltage (V) and capacitance (C) are required inputs / Load resistance (R) is optional for energy calculation.
The time constant (T = R × C) represents the time needed to charge a capacitor to 63.2% of the source voltage or discharge it to 36.8% of its initial voltage / After 5 time constants (5T), the capacitor is considered fully charged/discharged.
Use volts (V) for voltage / microfarads (µF) for capacitance / ohms (Ω) for resistance / Results are shown in joules (J) for energy and seconds (s) for time constant.
Energy depends only on voltage and capacitance (E = V²C/2) / Resistance is only required when calculating the time constant (T = RC).
Higher resistance increases the time constant (T = RC) / This slows down both charging and discharging processes / The voltage-current relationship follows exponential curves shown in RC charging/discharging tables.
ICAllIn’s Resistor Color Code Calculator is an interactive tool for identifying resistor values based on 4-band, 5-band, and 6-band color codes. Simply select the colors, and the calculator will display the resistance in Ohms (Ω), tolerance, and power rating. Whether you are building a circuit, repairing electronics, or sorting resistors in your lab, this calculator provides an accurate and efficient way to decode resistor values.
ICAllIn’s Ohm’s Law Calculator helps engineers and students quickly calculate resistance, current, voltage, and power in an electrical circuit. Simply enter any two known values, and the calculator will instantly compute the remaining parameters. This fast and easy-to-use online tool illustrates the fundamental relationship between voltage, current, and resistance, making it essential for circuit design, troubleshooting, and electronics learning.
The Op Amp Voltage and Gain Calculator is an easy-to-use tool for analyzing operational amplifier circuits. It calculates the output voltage, inverting gain, and non-inverting gain based on the input parameters. Simply enter the values of V1, V2, Vp, Vn, and the resistor values R1, R2, R3, and R4, and the calculator will instantly provide accurate results. This tool is suitable for both professional engineers and beginners learning op amp circuit design.











