DC-SP-01-C [Digi]

DC-SP-01-C Overview

A MPU Core-type board or module is used in this microcontroller.Processors with ARM7TDMI, NS7520 cores drive it.The microcontroller is set to -40°C~85°C by default, which is the default setting.Flash size on this MCU electronics is 4MB.Microprocessor chip is a type RJ45 connector.In the Digi Connect SP series, this is one of the microcontrollers.The RAM size has been reduced to 16MB in order to ensure that the software runs normally.A 55MHz-speed motor drives the MCU chip.At a frequency of 55MHz, MCU chip can continue to function accurately.Microprocessor chip is currently operating at 85°C°C, which is the maximum operational temperature.The temperature should be warmer than -40°C while microprocessor is operating.The architecture it uses at micro controller's core is ARM.An operating voltage of 30V volts is required to run this microcontrollers.During data storage, FLASH, RAM was selected as the value.It is set to 370mA in order to supply the MCUs with current.

DC-SP-01-C Features

Core processor of ARM7TDMI, NS7520
Flash size of 4MB
Speed of 55MHz
Core architecture of ARM

DC-SP-01-C Applications

There are a lot of Digi
DC-SP-01-C Microcontroller, Microprocessor, FPGA Modules applications.

• Medical Devices
• Data Acquisition
• Industrial Control
• Process Control
• Process Monitoring
• Healthcare Monitoring
• Patient Monitoring
• IoT Secure Gateways
• Human Machine Interface
• Human Machine Control Panel