3G3RX-A2004 Cooling Method
3G3RX-A2004 Inverter Capacity 200V CT
3G3RX-A2004 Inverter Capacity 200V VT
3G3RX-A2004 Max Applicable Motor CT
3G3RX-A2004 Max Applicable Motor VT
3G3RX-A2004 Minimum Connectable Resistance
3G3RX-A2004 Protective Structure
3G3RX-A2004 Rated Output Current CT
3G3RX-A2004 Rated Output Current VT
3G3RX-A4004 Cooling Method
3G3RX-A4004 Inverter Capacity 400V CT
3G3RX-A4004 Inverter Capacity 400V VT
3G3RX-A4004 Max Applicable Motor CT
3G3RX-A4004 Max Applicable Motor VT
3G3RX-A4004 Minimum Connectable Resistance
3G3RX-A4004 Protective Structure
3G3RX-A4004 Rated Output Current CT
3G3RX-A4004 Rated Output Current VT
3G3RX-B413K Cooling Method
3G3RX-B413K Inverter Capacity 400V CT
3G3RX-B413K Inverter Capacity 400V VT
3G3RX-B413K Max Applicable Motor CT
3G3RX-B413K Max Applicable Motor VT
3G3RX-B413K Minimum Connectable Resistance
3G3RX-B413K Protective Structure
3G3RX-B413K Rated Output Current CT
3G3RX-B413K Rated Output Current VT
Accel Decel Times
0.01 to 3600.0s (line/curve selection)
Allowable Frequency Fluctuation
Allowable Voltage Fluctuation
Ambient Humidity
90% RH or less (without condensation)
Analogue Inputs
Analogue inputs 0 to 10V and -10 to 10V (10KΩ), 4 to 20mA (100Ω)
Analogue Outputs
Analog voltage output, Analog current output, Pulse train output
Control Mode
Speed, torque and indexer functionality
Cooling Fin Overheat
Temperature monitor and error detection
Display
Status indicator LED's Run, Program, Power, Alarm, Hz, Amps, Volts,%; Digital operator: Available to monitor 23 items, output current, output frequency
Frequency Precision Analogue
±0.2% of the max. frequency (25 ±10°C)
Frequency Precision Digital
±0.01% of the max. frequency
Frequency Set Value
0 to 10VDC (10KΩ), -10 to 10VDC (10KΩ), 4 to 20mA (100Ω), EtherCAT communications
Input Signals
8 terminals, NO/NC switchable, sink/source logic switchable
Installation
Indoor (no corrosive gas, dust, etc.)
Instantaneous Overcurrent
200% of rated current for 3 seconds
Max Output Voltage 200V
Proportional to input voltage: 0 to 240V
Max Output Voltage 400V
Proportional to input voltage: 0 to 480V
Momentary Power Loss
Decelerates to stop with DC bus controlled, coast to stop
Motor Control
Phase-to-phase sinusoidal pulse with modulation PWM (Sensorless vector control, close loop vector with motor feedback, V/F)
Motor Overload Protection
Electronic Thermal overload relay and PTC thermistor input
Output Signals
5 open collector output terminals: NO/NC switchable, sink/source logic switchable; 1 relay (SPDT contact) output terminal: NO/NC switchable
Overload Capability
150%/60s, 200%/3s for CT; 120%/60s VT
Overvoltage
800V for 400V type and 400V for 200V type
Power Charge Indication
On when voltage between P and N is higher than 45V
Rated Input Voltage 200V
3-phase 200 to 240V 50/60Hz
Rated Input Voltage 400V
3-phase 380 to 480V 50/60Hz
Regenerative Braking
Internal BRD circuit (external discharge resistor)
Resolution Frequency Set Analog
Resolution Frequency Set Digital
Resolution Output Frequency
Stall Prevention
Stall prevention during acceleration, deceleration and constant speed
Standard Functions
V/f free setting (7), Upper/lower frequency limit, Frequency jump, Curve acceleration/deceleration, Manual torque boost level/break, Energy-saving operation, Analog meter adjustment, Starting frequency, Carrier frequency adjustment, Electronic thermal function, External start/end (frequency/rate), Analog input selection, Trip retry, Restart during momentary power interruption, Various signal outputs, Reduced voltage startup, Overload limit, Initialization value setting, Automatic deceleration at power-off, AVR function, Automatic acceleration/deceleration, Auto tuning (Online/Offline), High torque multi-motor operation control
Starting Torque
150%/0.3Hz (under sensor-less vector control or sensor-less vector control at 0Hz); 200%/Torque at 0Hz (under sensor-less vector control at 0Hz, when a motor size one rank lower than specified is connected)
V F Characteristics
V/f optionally changeable at base frequencies of 30 to 400Hz, V/f braking constant torque, reduction torque, sensor-less vector control, sensor-less vector control at 0Hz
Vibration
3G3RX-A•004 to A•220, 5.9m/s2 (0.6G), 10 to 55Hz; 3G3RX-A•300 to B•13K, 2.94m/s2 (0.3G), 10 to 55Hz
