BD6083GUL-E2 [ROHM]

BD6083GUL-E2 Overview

Save board space with 35-UFBGA, CSP package. 6 + 4LDOs outputs are designed into LED drivers.Surface Mount is used to mount the led light driver.With high reliability and efficiency, this emerges as a DC DC Regulator.This LED driver can be operated at a temperature of -30°C~85°C TA. A number of benefits are available to Backlight.Based on the frequency of 1MHz, it operates on the basis of a pulse.In this case, the terminations are set to 36.With a base of 36, this LED light driver is configured.Undetermined failures may occur if the voltage supply falls below 2.7V.A total of 6 segments are estimated.As you can see, it is mounted by Surface Mount.It can be found under the part number BD608*.On this device, there are 36 pins.As a result, its characteristics can also be categorized as Display Drivers.There is no current available to supply to the load.Powering systems requires an internal voltage of 5.5V.This device has a voltage output of 5.5V volts.

BD6083GUL-E2 Features

Available in the 35-UFBGA, CSP package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Output voltage of 5.5V

BD6083GUL-E2 Applications

There are a lot of ROHM Semiconductor
BD6083GUL-E2 LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices