The M24M01E-F is a 1-Mbit I²C-compatible EEPROM (electrically erasable programmable memory) organized as 128 K × 8 bits. It can operate with a supply voltage from 1.6 V to 5.5 V with a clock frequency up to 1 MHz, over an ambient temperature range of -40 °C to +85 °C.

The device offers three 8-bit registers, namely: the device type identifier (DTI) register, the configurable device address (CDA), and the software write protection (SWP) register.

The device offers an additional 256-byte page, called the identification page. This page can be used to store sensitive application parameters, which can later be permanently locked in read-only mode.

The M24M01E-F is available in the standard 8-pin TSSOP8, SO8N, UFDFPN8, and in the 5-ball wafer level chip scale packaging (WLCSP) with the WC pin.

On demand, the EEPROM can be delivered with a preprogrammed and locked device address.

• I²C interface
  • Compatible with the following I²C bus modes:
    • 1 MHz (Fast-mode Plus)
    • 400 kHz (Fast-mode)
    • 100 kHz (Standard-mode)
• Memory
  • 1-Mbit (128-Kbyte) of EEPROM
  • Page size: 256-byte
  • Additional 256-byte identification page
• Supply voltage
  • Wide voltage range: 1.6 V to 5.5 V
• Temperature
  • Operating temperature range: -40 °C to +85 °C
• Fast write cycle time
  • Byte and page write within 4 ms (typically 3 ms)
• Performance
  • Enhanced ESD/latch-up protection
  • More than 4 million write cycles
  • More than 200-year data retention
  • Fast wake-up time (less than 5 µs)
• Ultra-low power current consumption
  • 350 nA (typical) in standby mode
  • 100 µA (typical) for read current
  • 400 µA (typical) for write current
• Advanced features
  • Configurable device address register
  • Device type identifier register (in read-only)
  • Preprogrammed device address
  • Software write protection register
  • Hardware write protection of the whole
    memory array
  • Random and sequential read modes
• Packages
  • SO8N, TSSOP8, UFDFPN8, and WLCSP5 (ECOPACK2 compliant)