Part No:
M48Z35-70PC1
Category:
NVRAM
Description:
5V V Through Hole 28 Pin Memory IC M48Z35 256 kb kb 39.88mm mm 50mA mA 8b b
Package:
-
Production Status:
In Stock Status:
Specification
Package / Case
28-DIP Module (0.600, 15.24mm)
Moisture Sensitivity Level (MSL)
Technology
NVSRAM (Non-Volatile SRAM)
Write Cycle Time - Word, Page
Products Detail
M48Z35-70PC1 Overview
As far as memory types are concerned, Non-Volatile is considered to be its memory type. In addition, memory ics is available in a Tube case as well. In the case of 28-DIP Module (0.600, 15.24mm), it is embedded within the case. A memory chip with a capacity of 256Kb 32K x 8 is used on this device. There is a mainstream memory format used by this device, which is called NVSRAM-format memory. This device has an extended operating temperature range of 0°C~70°C TA, so it's perfect for a wide range of demanding applications. It is capable of handling a voltage supply of 4.75V~5.5V. As far as the mounting type is concerned, Through Hole is recommended. On the chip, there are 28 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. In order to select similar parts, typical manufacturers refer to M48Z35 as the device's base part number. The memory device has an 28-pin package, which encloses it in a small package. I have noticed that the memory device has 28 pins, which indicates that it has 28 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Through Hole mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 50mA. The memory chip has 1 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. In most cases, this memory ics is regarded as being a type of SRAMs. A ic memory chip like this one processes data at a frequency of 70GHz bits per second. There is a suggestion that the device should operate on an 50mA-amp supply current
M48Z35-70PC1 Features
Package / Case: 28-DIP Module (0.600, 15.24mm)
28 Pins
Operating Supply Voltage:5V
Freguency at 70GHz
70GHz terminals
M48Z35-70PC1 Applications
There are a lot of STMicroelectronics
M48Z35-70PC1 Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
Key Features
No key features available
Application scenarios
No application scenarios available
Documents
PCN Design/Specification: