Name: STG3220QTR
Brand: STMicroelectronics
SKU: STG3220QTR

Type

Parameter

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

10-UFQFN

Number of Pins

Operating Temperature

-40°C~85°C TA

JESD-609 Code

Part Status

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

Resistance

7Ohm

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Max Power Dissipation

1.12W

Technology

CMOS

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

Base Part Number

STG3220

Pin Count

Number of Outputs

Operating Supply Voltage

Max Supply Voltage

4.3V

Min Supply Voltage

1.65V

Operating Supply Current

200nA

Nominal Supply Current

200nA

Power Dissipation

1.12W

Turn On Delay Time

26 ns

Number of Inputs

Supply Type

Single

Bandwidth

800MHz

Turn-Off Delay Time

25 ns

On-State Resistance (Max)

5.4Ohm

Multiplexer/Demultiplexer Circuit

2:1

Current - Leakage (IS(off)) (Max)

20nA

Channel Capacitance (CS(off), CD(off))

2pF

Switch Circuit

SPDT

Switch Time (Ton, Toff) (Max)

15ns, 13ns

Charge Injection

6.4pC

Crosstalk

-78dB @ 1MHz

Switching

BREAK-BEFORE-MAKE

Voltage - Supply, Single (V+)

1.65V~4.3V

Radiation Hardening

RoHS Status

RoHS Compliant

Lead Free

STG3220QTR Overview

As the electronic part is packed in 10-UFQFN, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Digi-Reel®. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 10. The electrical component body receives 10 pins. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching with STG3220 to find analog multiplexer variants. An switch multiplexer with 7Ohm internal resistance has a value of 7Ohm. Datasheets for 10 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 4.3V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. An operating current of 200nA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1.65V~4.3V volts. 3V operating voltages can be used with this electrical part. Operating the 2 inputs requires 2 inputs. There are 800MHz bandwidths for data transfer. A analog switch ics with 4 outputs is included.