XC17V01PC20C [Xilinx]

XC17V01PC20C Overview

This package is based on a neat 20-LCC (J-Lead) package which is used by it.Packaging for the external use of Tube.In the state of 0°C~70°C, licensed to work.Using the OTP axis, it can be programmed to do whatever you want.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Surface Mount.Currently, data storage can only store data up to 1Mb bytes.Try searching "XC17V01" for more parts.There is a voltage requirement of 3.3V for supplying it with power.FPGA is possible to connect different functions on the 20 axis at different terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.If the device needs to be supplied with power, then a minimum voltage of 3V is required.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.Reflow soldering should be done at 225°C maximum.In this case, it has 20 pins.With the help of SERIAL-processing, data is sent through this memory.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.015mA.There is a set of 20 pins that are included with the part.I would like to mention that this is a memory IC that will be able to work at a 15MHz frequency, so I will mention that.The memory's I/O is configured to be COMMON in terms of its configuration.The use of a 3.3V power supply is recommended in order to achieve best results.

XC17V01PC20C Features

Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.

XC17V01PC20C Applications

There are a lot of Xilinx Inc.
XC17V01PC20C applications of configuration proms for FPGAs.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)