Другие модули

Quick Start Guide for the Renesas Synergy™ Platform Application Example for Capacitive Touch (AE-CAP1) kit.

32-MHz, 32-bit RX MCUs with 50 DMIPS, up to 512-KB flash memory, capacitive touch sensing, and IEC60730 compliance.

Quick Start Guide for the RL78G14 Motor Control Starter Kit, a pre-programmed motor control demonstration board.

RX62T microcontroller pre-programmed for motor control algorithm.

The Renesas YLCDRZA1H High Resolution Embedded GUI Solution Kit is a flexible and full-featured Human Machine Interface plus communications platform based on the Renesas RZ/A1H Microcontroller.

YLCDRX63NE is an LCD display module that requires an AC/DC Power Adapter for operation and features a power switch (S201) for control.

Low-Cost H8S 16-bit Microcontrollers with Zero Wait-State Flash, USB and TFT Drive. The H8S/245x and H8S/242x microcontrollers (MCUs) offer an extremely low-cost way to generate TFT-LCD based GUI solutions with medium graphic animation and a touchscreen.

Renesas’ third-generation Universal Serial Bus 3.0 host controller demonstration card complies with USB 3.0 Specification and Intel’s eXtensible Host Controller Interface (xHCI).

Renesas' third-generation Universal Serial Bus 3.0 host controller demonstration cards, compliant with USB 3.0 and xHCI specifications.

The X9259 integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated circuit.

The Intersil X90100 is a non-volatile electronically programmable capacitor with a simple digital interface.

TW9984 is a 4-channel video decoder and encoder for automotive applications, converting analog composite video to digital YCbCr data with high quality NTSC/PAL/SECAM support.

Techwell’s TW9919 is a high performance NTSC/PAL/SECAM multi-standard 10-bit video decoder plus SCART/YCbCr component inputs and analog RGB overlay support designed for multimedia applications.

LCD Video Processor with Built-In Decoder, MCU, OSD, TCON and Analog RGB Input Support

TFT Display Controller with integrated video decoder, triple high-speed RGB ADCs, scaler, and image enhancement functions for in-car LCD display systems.

The TW8824 is a highly integrated LCD video processor that incorporates many of the key features required to create a multipurpose LCD display system into a single package.

TFT Flat Panel Controller with Built-in 3D Video Decoder, Triple ADCs, Dual PIP and 16-bit OSD Support. The TW8823 incorporates many of the features required to create multi-purpose in-car LCD display system in a single package.

The TW8819 is an ultra low cost highly integrated LCD controller.

TFT Flat Panel Controller with built-in 3D Video Decoder, Triple ADCs, and PIP Support

The TW8809 is a low cost video format converter that can take either analog CVBS or 24-bit digital RGB format video and output these signals in ITU-R.656 format.

The TW6874 is a quad (SD/HD) SDI receiver with four independent channels, each featuring an adaptive equalizer, clock data recovery, audio decoder, and VC-2 decompression engine.

Intersil Techwell Security ICs for video processing in security surveillance systems.

Mixed signal integrated circuits for video applications in security surveillance and automotive infotainment markets.

Tsi381 is a PCI Express to PCI/PCI-X bridge chip enabling communication between PCIe and PCI buses.

Tsi381 is a PCIe-to-PCI bridge supporting x1 lane 2.5Gbps PCIe 1.1 and 32-bit PCI bus at 25-66MHz.

Tsi381 PCIe-to-PCI Bridge evaluation board for testing key features of the Tsi381 device.

Оценочная плата для OPA564 SM2400.OPA564, SM2400 - Интерфейсная оценочная плата для связи по линии электропитания/модема (PLC, PLM)

Оценочная плата для OPA564 SM2400.OPA564, SM2400 - Оценочная плата интерфейса связи по силовой линии/модема (PLC, PLM)

Оценочная плата для OPA564 SM2400.OPA564, SM2400 - Оценочная плата интерфейса связи по линии электропитания/модема (PLC, PLM)

A 12 V, 18 mΩ, 5 A Load Switch with V Lockout Select and MOSFET Current Monitor Output

GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple time Non-Volatile Memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with I²C interface.

SLG46140 GreenPAK is a one-time non-volatile memory (NVM) Programmable Mixed-Signal Matrix designed to implement a wide variety of mixed-signal functions in a single, small, low-power device.

40-MHz 32-bit RX MCUs, built-in FPU, 65.6 DMIPS, 12-bit ADC, 40MHz PWM

64KB 64K x 8 Флэш RL78 16-битный микроконтроллер серия RL78/G13 R5F100 64-контактный 32MHz 64-VFBGA

64KB Флэш микроконтроллер

32 КБ 32K x 8 FLASH RL78 16-битный микроконтроллер RL78/G13 серии R5F100 48 выводов 32 МГц 3 В 48-LQFP

Платформа оценки MCU 16-битный 78K/0R

The P9225-R is a high-efficiency wireless power receiver (Rx) capable of operating in both WPC and PMA protocols. Using magnetic inductive charging technology, the receiver converts an AC power signal from a resonant tank into a regulated DC output voltage ranging from 4.5V to 5.5V.

The P9221-R Wireless Power Receiver (Rx) is an integrated circuit (IC) consisting of multiple high-power blocks and noise-sensitive circuits controlled by a microprocessor.

The sales activity has declined to a level that warrants the discontinuance of these products. Some of these devices may have an alternate standard device or a suggested functional replacement.

The P9028AC is an integrated single-chip, dual-mode WPC v1.1.2-compliant and PMA v1.0-compatible, wireless power receiver IC with advanced WPC v1.1.2 Foreign Object Detection (FOD).

The P9025AC-R-EVK is a turnkey 5 Watt, Qi-compliant wireless power receiver reference kit for fast prototyping and design integration.

Микроконтроллер

The LDS700x family of devices (LDS7000 and LDS7001) are the world’s first true single layer, full-touch capacitance screen devices, with multi-touch capabilities.

Intersil’s FMC based high-speed ADC evaluation platform consists of custom designed hardware, which allows interfacing to an FMC based FPGA evaluation platform.

Dual 12-Bit, 250/210/170/125MSPS A/D Converter. The KAD5612P is a family of low-power, high-performance, dual-channel 12-bit, analog-to-digital converters.

The ISLA214P is a series of low power, high performance 14-bit analog-to-digital converters. Designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process, the series supports sampling rates of up to 250MSPS.

Product Discontinuance / Obsolescence Notification Products

The ISLA118P50 is a low-power, high-performance, 500MSPS analog-to-digital converter designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process.