XC17V02PC20C [Xilinx]

XC17V02PC20C Overview

This package is based on a neat 20-LCC (J-Lead) package which is used by it.Packaging for the external use of Tube.In the state of 0°C~70°C, licensed to work.Using the OTP axis, it can be programmed to do whatever you want.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Surface Mount.Try searching "XC17V02" for more parts.There is a voltage requirement of 3.3V for supplying it with power.FPGA is possible to connect different functions on the 20 axis at different terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.If the device needs to be supplied with power, then a minimum voltage of 3V is required.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.Reflow soldering should be done at 225°C maximum.In this case, it has 20 pins.With the help of SERIAL-processing, data is sent through this memory.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.015mA.There is a set of 20 pins that are included with the part.I would like to mention that this is a memory IC that will be able to work at a 15MHz frequency, so I will mention that.The memory's I/O is configured to be COMMON in terms of its configuration.The 3.3V company recommends that users apply 3.3V to a part before using it so the part will be able to run safely and reliably in a circuit.

XC17V02PC20C Features

Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.

XC17V02PC20C Applications

There are a lot of Xilinx Inc.
XC17V02PC20C applications of configuration proms for FPGAs.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)