Interface ICs

High performance fixed frequency current mode controllers for Off-Line and DC-DC converter applications.

The UC3844, UC3845 series are high performance fixed frequency current mode controllers. They are specifically designed for Off−Line and DC−to−DC converter applications offering the designer a cost effective solution with minimal external components.

The UC3842/UC3843/UC3844/UC3845 are fixed frequency current-mode PWM controller. They are specially designed for Off-Line and DC to DC converter applications with minimum external components.

The UC3842B, UC3843B series are high performance fixed frequency current mode controllers. They are specifically designed for Off−Line and DC−DC converter applications offering the designer a cost−effective solution with minimal external components.

High performance fixed frequency current mode controllers for off-line and DC-DC converter applications.

High Performance Current Mode Controllers designed for Off-Line and DC-DC converter applications.

The UC3844, UC3845 series are high performance fixed frequency current mode controllers. They are specifically designed for Off−Line and DC−to−DC converter applications offering the designer a cost effective solution with minimal external components.

High performance fixed frequency current mode controllers for Off-Line and DC-to-DC converter applications.

High performance fixed frequency current mode controllers for off-line and DC-DC converter applications.

The UC3842A, UC3843A series of high performance fixed frequency current mode controllers are specifically designed for off−line and DC−to−DC converter applications offering the designer a cost effective solution with minimal external components.

The TL594 is a fixed frequency, pulse width modulation control circuit designed primarily for Switchmode power supply control.

The TL594 is a fixed frequency, pulse width modulation control circuit designed primarily for Switchmode power supply control.

The TL431 and TL432 devices are three-terminal adjustable shunt regulators with specified thermal stability over applicable automotive, commercial, and military temperature ranges.

Dual bidirectional I2C-bus and SMBus voltage-level translator with enable input.

The PCA9306 is a dual bidirectional I2C−bus and SMBus voltage−level translator with an enable (EN) input.

The NM93C86A is 16,384 bits of CMOS nonvolatile, electrically erasable memory available in user organized as either 1024 16-bit registers or 2048 8-bit registers.

The MC74VHC1G50 / MC74VHC1GT50 is an advanced high speed CMOS buffer in tiny footprint packages.

A single non-inverting 3-state buffer in tiny footprint packages.

Single non-inverting buffer with open drain output in tiny footprint packages.

Single non-inverting buffer with open drain output in tiny footprint packages.

Dual bidirectional I2C-bus and SMBus voltage-level translator with enable input.

Quad 3-State Noninverting Buffers

Hex Schmitt Inverter

MC74VHC125 is a high speed CMOS quad bus buffer fabricated with silicon gate CMOS technology.

The NL17SZ74 is a high performance, full function Edge triggered D Flip Flop, with all the features of a standard logic device such as the 74LCX74.

The NL17SZ240 is a single inverting 3-state buffer in tiny footprint packages.

NLV17SZ07 is a high performance single non-inverting buffer with open drain outputs operating from a 1.65 to 5.5 V supply.

NLU1GT125 is an advanced CMOS high-speed non-inverting buffer in ultra-small footprint.

NLSV4T3234 is a 4-bit configurable dual-supply voltage level translator.

Low voltage single supply SPDT analog switch with high speed and low ON resistance.

The NL17SZ02 is a single 2-input NOR Gate in tiny footprint packages.

The NIS5x2x Series eFuse is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures.

The NE5532 is a internally compensated dual low noise OP-AMP.

The 5532 is a dual high-performance low noise operational amplifier.

The NCV4275A is an integrated low dropout regulator designed for use in harsh automotive environments. It includes wide operating temperature and input voltage ranges. The output is regulated at 5.0 V or 3.3 V and is rated to 450 mA of output current.

The NCV4274 and NCV4274A is a precision micro−power voltage regulator with an output current capability of 400 mA available in the DPAK, D2PAK and SOT−223 packages.

The NCP302 and NCP303 series are second generation ultra−low current voltage detectors that contain a programmable time delay generator.

The NCP300 and NCP301 series are second generation ultra−low current voltage detectors. These devices are specifically designed for use as reset controllers in portable microprocessor based systems where extended battery life is paramount.

The LM2931 series consists of positive fixed and adjustable output voltage regulators designed for low input-to-output voltage differential.

The LM2574 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step-down switching regulator (buck converter).

The main function of the NCS6416 is to switch 8 video input sources to the 6 outputs. The NCS6416 operates with a low 5 V power supply.

NCS2500 is a 1.1 mA 200 MHz current feedback monolithic operational amplifier featuring high slew rate and low differential gain and phase error.

NCS2500 is a 1.1 mA 200 MHz current feedback monolithic operational amplifier featuring high slew rate and low differential gain and phase error. The current feedback architecture allows for a superior bandwidth and low power consumption.

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary.

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary.

NCP6151: VR12 2-, 3-, 4-Phase CPU Controller + 1-Phase GPU Controller

The NCP3232N is a high current, high efficiency voltage−mode synchronous buck converter which operates from 4.5 V to 21 V input and generates output voltages down to 0.6 V at up to 15 A.

PWM Current-Mode Controller for Free-Running Quasi-Resonant Operation

PWM Current-Mode Controller for Free-Running Quasi-Resonant Operation

The NCN49599 is a powerful spread frequency shift keying (S−FSK) communication system−on−chip (SoC) designed for communication in hostile environments. It combines a low power ARM Cortex M0 processor with a high precision analogue front end and a robust line driver.