AT17N010-10PI [Microchip]

AT17N010-10PI Overview

This package is based on a neat 8-DIP (0.300, 7.62mm) package which is used by it.Packaging for the external use of Tube.In the state of -40°C~85°C, licensed to work.Using the Serial EEPROM axis, it can be programmed to do whatever you want.FPGA is powered by a voltage which is 3V~3.6V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Through Hole.Currently, data storage can only store data up to 1Mb bytes.Try searching "AT17N010" for more parts.In this case, it has 8 pins.This part is supplied by the manufacturer in the form of a device package.The 3.3V company recommends that users apply 3.3V to a part before using it so the part will be able to run safely and reliably in a circuit.In other words, it is suitable for applications using the Through Hole operating system.A switching controller must operate at a frequency of 10MHz to get its control to work.There is a capability of operating it at temperatures as low as -40°C, which is extremely low.Memory is recommended that the temperature of the ambient environment not exceed 85°C when Memory is operating.In order for it to run, it should have a voltage at least equal to 3V.Memory is rated 3.6V for the maximum supply voltage of the device.

AT17N010-10PI Features

Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
Frequency: 10MHz.

AT17N010-10PI Applications

There are a lot of Microchip Technology
AT17N010-10PI applications of configuration proms for FPGAs.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)