XC1701SO20C [Xilinx]

XC1701SO20C Overview

FPGA uses a nice 20-SOIC (0.295, 7.50mm Width) package that makes FPGA easy to use.External packaging for the Tube series.0°C~70°C license holder.OTP is the program that allows it to be programmed.This device is fed with a voltage of 4.75V~5.25V which is applied to it.There is a memory device mounted in Surface Mount position for this device.Look for "XC1701" for other related parts.The supply voltage of the device must be 5V in order to operate correctly.There are different functions that can be applied on the 20 axis when it comes to terminating.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The reflow soldering process should be done at a temperature no higher than 225.The 20 pins are on the board.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.The memory chip is allowed to operate at a voltage that is no greater than 0.02mA.As part of the package, the part comes with a set of 20 pins.I think it's important to point out that this is a memory IC that has a 15MHz frequency that can be operated at.There is a configuration of COMMON for the memory's I/O.A power supply that is rated at 5V is recommended for use with this product.Prior to the use of the part in a circuit, it is recommended that users apply the 5V to the part so that the part will run as safely and reliably as possible.Our product line now includes USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS in order to provide a better level of service to our customers.

XC1701SO20C Features

Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.

XC1701SO20C Applications

There are a lot of Xilinx Inc.
XC1701SO20C applications of configuration proms for FPGAs.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card