XC17S20VO8I Overview

FPGA uses a nice 8-SOIC (0.154, 3.90mm Width) package that makes FPGA easy to use.External packaging for the Tube series.-40°C~85°C license holder.OTP is the program that allows it to be programmed.This device is fed with a voltage of 4.5V~5.5V which is applied to it.There is a memory device mounted in Surface Mount position for this device.There is a limit of 200kb MB for the amount of data that can be stored.Look for "XC17S20" for other related parts.The supply voltage of the device must be 5V in order to operate correctly.There are different functions that can be applied on the 8 axis when it comes to terminating.As long as the maximum voltage of the memory device is 5.5V, then the memory device can be used.FPGA is imperative that the voltage of the device supply is at least 4.5V if the device is to work properly.An example of a MEMORY CIRCUIT memory chip can be seen in the picture below.The reflow soldering process should be done at a temperature no higher than 225.The 8 pins are on the board.The memory chip is allowed to operate at a voltage that is no greater than 0.01mA.As part of the package, the part comes with a set of 8 pins.I think it's important to point out that this is a memory IC that has a 10MHz frequency that can be operated at.There is a configuration of COMMON for the memory's I/O.A power supply that is rated at 5V is recommended for use with this product.

XC17S20VO8I Features

Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.

XC17S20VO8I Applications

There are a lot of Xilinx Inc.
XC17S20VO8I applications of configuration proms for FPGAs.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card